Keysight Oscilloscope Mobile 2.3

The Keysight Oscilloscope Mobile application is a notable development from Keysight Labs, designed to enhance the usability of Keysight/Agilent oscilloscopes directly from an iPad or iPhone. This application allows users to monitor live waveforms, perform measurements, capture instrument screenshots, and manage their oscilloscopes seamlessly through mobile devices.

Key Features:

• Supports up to four analog channels.
• Includes a simulation mode for preliminary experimentation without direct oscilloscope connection.
• Enables saving of screen captures from the oscilloscope to your mobile device.
• Allows monitoring and control over LAN, USB, GPIB, or RS232 connected oscilloscopes.
• Facilitates collaboration by enabling multiple users to view the same oscilloscope's output on their respective devices.

Users can control various functions of compatible Keysight/Agilent oscilloscopes, including:

• Start, stop, or single acquisition of measurements.
• Auto-scaling features.
• Adjusting time/div and volts/div settings.
• Toggling channels on and off.
• Selecting trigger types, levels, and sources.
• Measuring frequency, rise/fall time, minimum/maximum values, and peak-to-peak metrics.

Connecting to an Oscilloscope:

If the oscilloscope is networked, a connection from the mobile device can be established with the following steps:

1. Launch Oscilloscope Mobile on your device and select Connect to Scope.
2. Select Direct for the connection setting.
3. Input the IP address or hostname of your oscilloscope and tap Connect.

If the oscilloscope is connected to a PC using LAN, GPIB, USB, or RS232, it can be accessed through the Oscilloscope Mobile Agent with these steps:

1. Install the free Keysight Oscilloscope Mobile Agent on your Windows PC (compatible with WinXP, Win7, Win8, Win10) from http://www.keysight.com/find/scopemobile.
2. Run the Oscilloscope Mobile Agent on your PC and connect to your oscilloscope.
3. Open this app and choose Connect to Scope.
4. Enter your PC's IP address or hostname and tap Connect.

Supported Oscilloscope Models:

• InfiniiVision 2000 X-Series: minimum firmware revision 01.10
• InfiniiVision 3000A X-Series: minimum firmware revision 01.10
• InfiniiVision 3000T X-Series: minimum firmware revision 04.00 (1)
• InfiniiVision 4000 X-Series: minimum firmware revision 03.00
• InfiniiVision 5000 Series: minimum firmware revision 05.20 (1)
• InfiniiVision 6000 Series: minimum firmware revision 05.20
• InfiniiVision 6000 X-Series: minimum firmware revision 06.00 (2)
• InfiniiVision 7000 Series: minimum firmware revision 05.20
• Infiniium 9000 Series: minimum firmware revision 03.10
• Infiniium S-Series: minimum firmware revision 05.00 (2)

Notes:

• (1) Requires Oscilloscope Mobile Agent version 1.5 or higher for PC connections.
• (2) Requires Oscilloscope Mobile Agent version 1.4 or higher for PC connections.

Support and Feedback:

User inquiries regarding bugs or questions are encouraged to be directed to scopemobile_support@keysight.com for assistance and feedback.